Paging and Music


A simple-to-use audio input module is all that’s needed to add music or paging to your sound masking system.

Content coming soon.

Audio Input Modules AIM-2A, AIM-2M, AIM-2T

Audio Input Modules, AIM-2A, AIM-2M, AIM-2T

The LogiSon® Acoustic Network is also a versatile paging and music system—simply install an Audio Input Module in the Network Control Panel and connect a source, such as a telephone or MP3 player. Area by area, use masking only, paging and music only or a combination—all within a single system.

Audio Input Modules offer analog to digital conversion and automatically adjust for input sensitivity. Each panel accepts any combination of three inputs: auxiliary, microphone and telephone.

The LogiSon Acoustic Network also features a Priority Page Override, which can be programmed to mute the masking during emergencies. When a priority signal is relayed to the panel, it sets the volume to a pre-programmed level and plays the announcement over the entire system. The administrator can set the masking to either continue to run or to mute during this page. Once the priority page is complete, the system returns to its original settings.

Refuse to compromise

The paging and music functions play over the same set of loudspeakers as the sound masking, but zoning and settings are independent—so you can configure the system exactly as needed.

Plus the amplification and equalization technology is already integrated into the hubs, reducing the cost, energy and space typically needed for audio equipment.

Customized zones

Whereas most systems limit paging to a small number of predefined zones, the LogiSon® Acoustic Network’s zoning is digital, not hardwired. Users can create customized zones whenever and wherever required using Page Director software. Changes can be made within minutes.

 

Product Sheet 

  Print this information by downloading our product sheet

Specifications

Auxiliary
Input Impedance100 kohm
Input Level10 V maximum
Input Sensitivity300 mV maximum
GainMaximum 20 dB, adjustable in thirty two 1 dB steps
Frequency Response20 to 10,000 Hz
Microphone
Input Impedance600 ohm
Input Level30 mV maximum
Input Sensitivity1 mV for maximum output
GainMaximum 70 dB, adjustable in thirty two 1 dB steps
Frequency Response20 to 10,000 Hz
Telephone
Input Impedance600 ohm
Input Level10 V maximum
Input Sensitivity300 mV for maximum output
GainMaximum 20 dB, adjustable in thirty two 1 dB steps
Frequency Response20 to 10,000 Hz
Warranty5 years; see LogiSon® Product Warranty for details
CertificationsMeets UL, CE, ACMA (C-TICK) and FCC standards; RoHS compliant

Content coming soon.